About Screw & Pin: Puzzle Levels
Most puzzle games teach you their rule over a dozen gentle levels. Screw & Pin: Puzzle Levels teaches it in one move and then puts a clock on you. The first board has one screw, one spare hole and no timer. The second has two screws, two spare holes and two minutes, and it was enough to stop us.
The idea is the kind you understand from a single picture. A large copper plate has a smaller silver plate fixed to it by a screw. Somewhere else on the copper there is an empty hole. You cannot throw a screw away: you can only move it from the hole it is in to a hole that is free. Take the last screw out of a plate and nothing holds that plate any more.
So the puzzle is never "which screw do I remove". It is "where do I park it". Each screw you lift has to land somewhere, and the hole it lands in is then taken. On a board with many plates and few spare holes, the order of the moves is the whole game.
Screw & Pin: Puzzle Levels is by Square Dino LLC. It was published in April 2026.
Our session lasted about four minutes. We solved the first level and got stuck on the second, and the rest of this page is honest about that.
Level one has no clock, level two gives you two minutes
The first board is a demonstration. A copper plate, one empty hole near the top, a silver plate near the bottom held by one cross-head screw. We tapped the screw and it stood up out of the plate. The hole above lit up. We tapped the hole, and the next thing on screen was the win screen. There was no timer anywhere on that level, so you can stare at it as long as you like.
The second board looks almost the same and is a different kind of problem. The silver piece is now a long bar across the bottom of the copper plate, held by two screws, one at each end. Above it are two empty holes, side by side. And at the top of the screen there is a small clock that starts at 2:00.
Two screws change the logic. A bar pinned at two points cannot move. Take one screw away and it is still pinned at the other, so nothing is free yet. You need both screws out of the bar, and there happen to be exactly two spare holes to hold them. We expect that is the solution, but we have to be straight: we did not manage it. We tapped each screw and each hole in turn, the board stayed as it was, and the clock ran down to 1:22 before we reached for the restart button.
Our best guess at what went wrong is rhythm. The game wants two clean taps, screw then hole, and a tap that lands while the label is still fading or slightly off the screw head seems to count for nothing. If a screw does not rise, tap it again squarely before you tap a hole.
Restarting costs a life
On most puzzle games the restart button is free, and you press it without thinking. Here it is not. When we pressed the orange arrow on level two, the board dimmed and a box asked "Are you Sure?". Under it was a broken heart with -1 beside it and the line "You will lose a life!". A green RESTART button confirms; a small cross in the corner backs out.
We confirmed. The level came back in its starting layout with the label up and the clock at 2:00 again. So a restart buys you a full two minutes and costs you one life.
What we cannot tell you is how many lives you have or how they come back. No lives counter was visible on the level screen, and we did not stay long enough to run out. We also never let the clock reach zero, so whether a timeout takes a life as well is something you will find out before we do. The sensible reading is that both do, which makes the restart a poor way to buy thinking time. Think first, with the label still on screen and the clock stopped at 2:00.
What the game says it has, and what we saw
The game's own description promises more than 150 levels, a hint button, an option to remove random screws and a Level of the day made from the hardest boards. We saw none of that in two levels. The level screen showed three buttons only: back, restart and settings. The win screen added a trophy button on the left edge, which we did not press.
That is not a complaint. Two levels is a small sample, and helpers in this kind of game usually arrive once the boards get crowded. But if you are stuck on level two as we were, do not look for a hint button there. We found none.
The cross on the screw head is a factory invention
Every screw in the game has a cross cut into its head, and that shape has a date. John P. Thompson patented the cross-head screw in 1932. Henry F. Phillips, a businessman from Portland, Oregon, bought the design in 1935 and refined it, and it carries his name to this day.
The reason it spread is the same reason it suits a tapping game. A slotted screw lets the driver slide sideways out of the slot. A cross centres the driver by itself, which made it practical for powered screwdrivers on an assembly line. A car factory was the first to use it, in 1936, and by 1940 most American screw makers held a licence.
The game borrows the look and keeps the spirit: no fiddling, no turning, one touch per screw. The difficulty is moved from the hand to the head.
Who it suits
People who like to solve a board by looking at it before touching anything. The rule is tiny and the first level takes seconds, so children can start it alone. The clock and the lives make it less relaxed than it looks, though. If you want a puzzle you can poke at freely until it gives way, the price on the restart button will annoy you.
More puzzles with nuts, bolts and blocks
The closest relative in our catalogue is Screw Out Jam Puzzle, which adds colours to the screws. Nuts Puzzle: Sort By Color keeps the hardware and turns it into a sorting game. For the same think-before-you-tap habit with wooden pieces, try Tap 3D Wood Block Away or Wood Blocks Jam. The rest are under puzzle games.
Screenshots
Taken by opening the game ourselves and letting it run — not supplied by the publisher, and not the same picture every other site shows.
How to play Screw & Pin: Puzzle Levels
- Click or tap the board once. The words TAP TO PLAY sit over the plates at the start of each level and this clears them.
- Tap a screw. It rises out of its hole, and you can see the hole it left underneath it.
- Tap an empty hole. The lifted screw goes there.
- Repeat until the plates are free. On our first level one move was enough, and the screen changed to "YOU WIN!" with a star marked +1.
- Press the green Continue button for the next board.
Things worth knowing before you start:
- Your first tap is spent on starting the level. It does not pick up a screw, even if you aim it at one, because the TAP TO PLAY label sits right over the screws. Tap once anywhere, then begin.
- The clock starts with that tap. On the second level the timer read 2:00 while the label was up and 1:59 a moment after we touched the board.
- Watch for the green glow. On the first level, lifting the screw lit the empty hole in green and a hand pointed at it. That is how the game shows a hole is a valid target.
- Do not restart out of habit. The orange arrow in the top right resets the board, but it costs a life. More on that below.
- The keyboard does nothing. We tried the arrow keys and got no response. It is a mouse or finger game.
Controls
| Click or tap anywhere on the level | Clears the TAP TO PLAY label and starts the level; from the second level on it also starts the timer |
|---|---|
| Click or tap a screw | Lifts it out of its hole and lights up the empty hole it can go to |
| Click or tap an empty hole | Drops the lifted screw into it |
| Orange arrow button (top right) | Restarts the level after a warning that it costs one life |
| Gear button (top right) | Settings; we did not open it |
| Red arrow button (top left) | Goes back out of the level |
Features
- A board of brushed metal plates held together by cross-head screws, with spare holes to park them in
- Two taps per move, one on the screw to lift it and one on the hole where it lands
- An untimed first level with a glowing hole and a pointing hand that show the move
- A countdown from the second level on: ours started at 2:00
- A lives system, where restarting a level by hand costs one life after a warning
- One star for every level solved, shown on the win screen
- Made by Square Dino LLC
Game details
- Developer
- Square Dino LLC
- Release date
- April 2026
- Last updated
- August 10, 2026
- Added here
- January 2026
- Technology
- HTML5
- Platforms
- Browser (desktop, mouse), Browser (mobile & tablet)
- Classification
- Puzzle
- Saved progress
- Saving, when available, is managed by this game. Mava cannot confirm your level.
FAQ
How do you play Screw & Pin: Puzzle Levels?
Tap once to start the level. Then tap a screw to lift it out of its hole and tap an empty hole to drop it there. A plate with no screws left through it is free, and the level ends when the plates are released. Everything is done with single taps or clicks.
How do you beat level 1 of Screw & Pin: Puzzle Levels?
Tap the single screw in the small silver plate, and it rises out of its hole. The empty hole higher up on the copper plate glows green with a hand pointing at it. Tap that hole, the screw moves there, and the win screen appears with one star.
Is there a time limit in Screw & Pin: Puzzle Levels?
Not on the first level, which has no clock at all. The second level showed a timer at the top that started at 2:00 and began counting down on our first tap. We did not let it reach zero, so we cannot say exactly what happens when it does.
What happens if you restart a level in Screw & Pin: Puzzle Levels?
The game asks "Are you Sure?" and shows a broken heart with -1 and the line "You will lose a life!". If you press RESTART, the level goes back to its starting layout with a full clock. A small cross in the corner of the box closes it without restarting.
How many levels does Screw & Pin: Puzzle Levels have?
The game's own description says more than 150, with new ones being added, plus a Level of the day mode for the hardest boards. We played the first two levels, solved one of them, and did not open Level of the day, so we cannot confirm the count ourselves.
Are there hints in Screw & Pin: Puzzle Levels?
The game's instructions mention a hint button and an option to remove random screws. We saw neither on the first two levels, where the only buttons were back, restart and settings. They may appear on later boards, but we did not get far enough to check.
Who made Screw & Pin: Puzzle Levels?
It is by Square Dino LLC. The game was published in April 2026 and updated in August 2026.
Can you play Screw & Pin: Puzzle Levels on a phone?
It is listed for PC, Android and iOS, in both landscape and portrait. The whole game is taps, which suits a touch screen, but we played on a computer with the mouse and did not test a phone.